This section will present the step by step to configure a static route with MPLS.

For more information about MPLS, see this page.

This demonstration will take into account the following structure:


Dynamic Routing - Structure


In this structure, three UTMs connected by MPLS will be interconnected. The following IPs will be used in this example:


ECMP - IP addressing

Name

LAN IP address

      Links

UTM A

192.168.11.1/24

20.0.0.1/30
30.0.0.1/30

UTM B

192.168.12.1/24

20.0.0.2/30
40.0.0.1/30
 UTM C192.168.13.1/2430.0.0.2/30
40.0.0.1/30


The steps we will take in this demonstration will be:


  1. Configuring Interfaces on UTM A;
  2. Configuration of static routes in UTM A;
  3. Configuring the Interfaces on UTM B;
  4. Configuration of static routes in UTM B;
  5. Configuration of Interfaces in UTM C;
  6. Configuration of Interfaces in UTM C;
  7. Validation of Static Routing Configuration


We will start the demo by configuring the UTM A interfaces.

  • No labels