Page tree
Skip to end of metadata
Go to start of metadata

On the Blockbit website download the corresponding installation image.
The images must be downloaded and saved to a folder on the computer. Check the MD5SUM of the files to ensure they are not corrupted. The application to perform MD5SUM on Microsoft Windows is WinMD5Free (http://www.winmd5.com/), to perform this verification follow the steps below:

Checking files

  1. Open the application, the following screen will be displayed:



WinMD5


     2. Select the image file and wait for the calculation:



MD5 Check


    3. Compare the values obtained from the two images in WinMD5 with the respective values saved in the section.


Recording the images


To save the images, you need the Win32 Disk Imager application that can be downloaded by clicking on this link: https://sourceforge.net/projects/win32diskimager/files/Archive/.


  1. Insert a pendrive, at least 8 GB;
  2. Open the application, the following screen will be displayed:



Win Disk Image


     3. Click on the "folder" image and select the appropriate image to be saved to the USB sticks. Ex.: UTM-Install-firmware.img;



Recording the image


4. Select the Device corresponding to the USB stick that you want to record the image;

5. To save the image click on "Write" and wait for the image to be saved on the USB stick;



Image recording process


6. After the recording confirmation message appears, the flash drive will be ready for use;



Completing image recording


Console Access - Putty


Before starting the following procedures, the Putty application must be available on the machine where the connection to the Equipment will be made. Putty is free and open source terminal emulation software. 

Now configure the terminal emulator with the following parameters:


  • Port: COM1 (a porta pode variar, verifique seu gerenciador de dispositivos do Windows);
  • Standard transmission rate: 115200;
  • Standard data bits: 8;
  • Standard stop bits: 1;
  • Standard parity: None.



Putty Settings



Putty Connect


On the Blockbit website download the corresponding installation image.
The images must be downloaded and saved to a folder on the computer. Check the MD5SUM of the files to ensure they are not corrupted. The application to perform MD5SUM on Microsoft Windows is WinMD5Free (http://www.winmd5.com/), to perform this verification follow the steps below:

Checking files

  1. Open the application, the following screen will be displayed:



WinMD5


     2. Select the image file and wait for the calculation:



MD5 Check


    3. Compare the values obtained from the two images in WinMD5 with the respective values saved in the section.


Recording the images


To save the images, you need the Win32 Disk Imager application that can be downloaded by clicking on this link: https://sourceforge.net/projects/win32diskimager/files/Archive/.


  1. Insert a pendrive, at least 8 GB;
  2. Open the application, the following screen will be displayed:



Win Disk Image


     3. Click on the "folder" image and select the appropriate image to be saved to the USB sticks. Ex.: UTM-Install-firmware.img;



Recording the image


4. Select the Device corresponding to the USB stick that you want to record the image;

5. To save the image click on "Write" and wait for the image to be saved on the USB stick;



Image recording process


6. After the recording confirmation message appears, the flash drive will be ready for use;



Completing image recording


Console Access - Putty


Before starting the following procedures, the Putty application must be available on the machine where the connection to the Equipment will be made. Putty is free and open source terminal emulation software. 

Now configure the terminal emulator with the following parameters:


  • Port: COM1 (a porta pode variar, verifique seu gerenciador de dispositivos do Windows);
  • Standard transmission rate: 115200;
  • Standard data bits: 8;
  • Standard stop bits: 1;
  • Standard parity: None.



Putty Settings



Putty Connect


Next, we will analyze how to perform the physical installation of the Appliances.

  • No labels
Write a comment…