Policy definition:

• [Properties]: Web Navigation Users, Action: Allow; Enable traffic logging; Policy Group = Web Filter;
• [Conditions]: Zone = LAN, Authenticated, Services (HTTP; HTTPS);
• [Inspection]: SSL Inspection, Threat Protection and Web Filter;
• [Routing]: Medium Priority (Reservation 50% link) and TAG = Maintain the tags generated by the system.

To add a security policy, in the actions menu [], click on the “Create Policy” option;

IPv4 - Actions Menu - Create Policy

Configure each tab according to the settings shown below.

Properties

In the [Properties] tab, under Name, name it as: “Web Navigation Users”;

In Description, type “Web Navigation Users”;

In Action select the option “Allow”;

In Policy Group select “Web Filter”;

Select the Traffic Logging[] checkbox .

You will have arrived at the result illustrated by the image below:

Create Policy – Ex. 1 – Properties

Select the next tab, [Conditions].

Conditions

In the [Conditions] tab, in Network Zone select: “LAN”;

In Service select HTTP and HTTPS;

Check the Authenticated [] checkbox.

You will have arrived at the result illustrated by the image below:

Create Policy – Ex. 1 – Conditions

Select the next tab, [Inspection].

Inspection

On the [Inspection] tab, check the SSL Inspection [] checkbox and add a profile that inspects HTTPS (For more information, check this page);

Select the Threat Protection [] checkbox and add the profile with the desired malware checks and blocks (For more information, check this page);

Select the Web Filter [] checkbox and add the profile with the categories you want to filter (For more information, check this page);

You will have arrived at the result illustrated by the image below:

Create Policy – Ex. 1 – Inspection

Select the next tab, [Routing].

Routing

On the [Routing] tab, select the Traffic Shaping [] checkbox and select the Medium option.

You will have arrived at the result illustrated by the image below:

Add Policy – Ex. 1 – Routing

After configuring each tab according to the definition of the applied policy, click on [].

Policy Saved Successfully

The screen illustrated in the following image will be displayed:

Add Policy – Web Navigation Users

After saving, for the policy to take effect it will be necessary to access the command queue [] and apply the changes made. For more information on the command queue access the page: UTM - Command queue.

After performing these procedures, the policy will have been successfully configured.

In example 1 we defined and add a policy for web access with inspection, however, without restrictions or any type of filter.